LHLC08 [TAIYO YUDEN]
RADIAL LEADED INDUCTORS;型号: | LHLC08 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | RADIAL LEADED INDUCTORS |
文件: | 总20页 (文件大小:677K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2014. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
RADIAL LEADED INDUCTORS
WAVE
■PARTS NUMBER
*Operating Temp. : -25~+105℃(Including self-generated heat)
△=Blank space
△ △ △
L
H △ L △
0
8
T
B
1
0
1
K
①
②
③
④
⑤
⑥
⑦
①Series name
Code
④Packaging
Series name
Code
NB
Packaging
Bulk(LHL)
LH△
Radial leaded inductor
TB
Ammo packaging(LHL)
②Characteristics
Code
L△
LP
Characteristics
⑤Nominal inductance
Standard type Taping available
Shielded type Bulk
Code
Nominal inductance[μH]
(example)
1R0
1.0
15
LC
High current type
150
102
③Dimensions(D)
1000
Code
08
Dimensions(D)[mm max.]
※R=Decimal point
/
9.0
⑥Inductance tolerance
10
11.0
13.0
14.0
17.0
Code
Inductance tolerance
±5%
12
J
K
M
N
13
±10%
16
±20%
±30%
⑦Internal code
Code
Internal code
Standard
△△△
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
LHL /LHLC
LHLP
Standard quantity [pcs]
Bulk
Type
LH L 08
D
H2
ℓ
F
φd
Box
-
Taping
9.0 max
(0.354 max)
11.0 max
9.5 max
(0.374 max)
14.0 max
5.0±1.0
(0.197±0.039)
5.0±1.0
5.0±1.0
(0.197±0.039)
5.0±1.0
0.6±0.05
(0.024±0.002)
0.6±0.05
100
50
25
-
1000
500
500
200
-
LH LC08
LH L 10
LH LC10
-
-
(0.433 max)
14.0 max
(0.551 max)
17.0 max
(0.197±0.039)
5.0±1.0
(0.197±0.039)
7.5±1.0
(0.024±0.002)
0.8±0.05
LH L 13
LH LP10
LH LP12
LH LP16
(0.551 max)
11.0 max
(0.669 max)
11.0 max
(0.197±0.039)
5.0±1.0
(0.295±0.039)
5.0±1.0
(0.031±0.002)
0.6±0.05
500
300
200
(0.433 max)
13.0 max
(0.433 max)
16.0 max
(0.197±0.039)
5.0±1.0
(0.197±0.039)
5.0±1.0
(0.024±0.002)
0.6±0.05
-
(0.512 max)
17.0 max
(0.624 max)
19.0 max
(0.197±0.039)
5.0±1.0
(0.197±0.039)
7.5±1.0
(0.024±0.002)
0.8±0.05
-
-
(0.669 max)
(0.741 max)
(0.197±0.039)
(0.295±0.039)
(0.031±0.002)
Unit:mm(inch)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
86
■PARTS NUMBER
●LHL08
Self-resonant
frequency
[MHz](min..)
Nominal inductance
[μH]
Inductance
tolerance
Q
(min.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Measuring frequency
[MHz]
Parts number
EHS
LH L 08[]1R0N
LH L 08[]1R5M
LH L 08[]2R2M
LH L 08[]2R7M
LH L 08[]3R3M
LH L 08[]3R9M
LH L 08[]4R7M
LH L 08[]5R6M
LH L 08[]6R8M
LH L 08[]8R2M
LH L 08[]100K
LH L 08[]120K
LH L 08[]150K
LH L 08[]180K
LH L 08[]220K
LH L 08[]270K
LH L 08[]330K
LH L 08[]390K
LH L 08[]470K
LH L 08[]560K
LH L 08[]680K
LH L 08[]820K
LH L 08[]101K
LH L 08[]121K
LH L 08[]151K
LH L 08[]181K
LH L 08[]221K
LH L 08[]271K
LH L 08[]331K
LH L 08[]391K
LH L 08[]471K
LH L 08[]561K
LH L 08[]681K
LH L 08[]821K
LH L 08[]102J
LH L 08[]122J
LH L 08[]152J
LH L 08[]182J
LH L 08[]222J
LH L 08[]272J
LH L 08[]332J
LH L 08[]392J
LH L 08[]472J
LH L 08[]562J
LH L 08[]682J
LH L 08[]822J
LH L 08[]103J
LH L 08[]123J
LH L 08[]153J
LH L 08[]183J
LH L 08[]223J
LH L 08[]273J
LH L 08[]333J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±5%
40
40
40
40
40
40
40
40
40
40
65
65
50
50
50
50
40
40
40
40
35
35
25
25
20
35
35
25
25
20
25
25
25
30
55
45
55
55
55
55
55
55
65
65
65
65
60
60
60
60
60
60
60
76
65
0.013
0.014
0.017
0.019
0.021
0.024
0.025
0.028
0.030
0.034
0.041
0.044
0.053
0.060
0.068
0.091
0.10
0.12
0.15
0.17
0.20
0.22
0.32
0.36
0.41
0.66
0.73
0.85
0.97
1.1
4.7
4.4
7.96
7.96
2.2
56
4.1
7.96
2.7
48
3.5
7.96
3.3
41
3.2
7.96
3.9
33
3.1
7.96
4.7
30
3.0
7.96
5.6
23
2.9
7.96
6.8
21
2.8
7.96
8.2
19
2.5
7.96
10
17
2.4
2.52
12
16
2.3
2.52
15
13
2.0
2.52
18
12
1.9
2.52
22
11
1.8
2.52
27
10
1.5
2.52
33
8.8
8.4
8.2
7.9
7.0
6.5
5.7
5.2
4.7
4.2
3.7
3.5
3.2
2.9
2.4
2.2
2.0
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.85
0.78
0.68
0.62
0.61
0.60
0.48
0.44
0.35
0.30
0.28
0.25
0.23
1.4
2.52
39
1.3
2.52
47
1.2
2.52
56
1.1
2.52
68
1.0
2.52
82
0.90
0.79
0.70
0.64
0.60
0.53
0.51
0.44
0.41
0.38
0.35
0.32
0.30
0.25
0.22
0.20
0.19
0.16
0.15
0.14
0.11
0.10
0.093
0.092
0.084
0.070
0.064
0.051
0.048
0.044
0.042
0.040
2.52
/
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
0.796
0.796
0.796
0.796
0.796
0.796
0.796
0.796
1.3
0.796
1.5
0.796
1.8
0.796
2.3
0.796
2.7
0.252
±5%
3.2
0.252
±5%
4.1
0.252
±5%
4.8
0.252
±5%
5.6
0.252
0.252
±5%
7.5
±5%
8.5
0.252
±5%
9.7
0.252
±5%
14
0.252
±5%
16
0.252
±5%
18
0.252
±5%
20
0.252
±5%
32
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
±5%
36
±5%
62
±5%
72
±5%
82
±5%
90
±5%
100
・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
87
■PARTS NUMBER
●LHL10
Self-resonant
frequency
[MHz](min..)
Nominal inductance
[μH]
Inductance
tolerance
Q
(min.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Measuring frequency
[MHz]
Parts number
EHS
LH L 10[]3R3M
LH L 10[]3R9M
LH L 10[]4R7M
LH L 10[]5R6M
LH L 10[]6R8M
LH L 10[]8R2M
LH L 10[]100K
LH L 10[]120K
LH L 10[]150K
LH L 10[]180K
LH L 10[]220K
LH L 10[]270K
LH L 10[]330K
LH L 10[]390K
LH L 10[]470K
LH L 10[]560K
LH L 10[]680K
LH L 10[]820K
LH L 10[]101K
LH L 10[]121K
LH L 10[]151K
LH L 10[]181K
LH L 10[]221K
LH L 10[]271K
LH L 10[]331K
LH L 10[]391K
LH L 10[]471K
LH L 10[]561K
LH L 10[]681K
LH L 10[]821K
LH L 10[]102J
LH L 10[]122J
LH L 10[]152J
LH L 10[]182J
LH L 10[]222J
LH L 10[]272J
LH L 10[]332J
LH L 10[]392J
LH L 10[]472J
LH L 10[]562J
LH L 10[]682J
LH L 10[]822J
LH L 10[]103J
LH L 10[]123J
LH L 10[]153J
LH L 10[]183J
LH L 10[]223J
LH L 10[]273J
LH L 10[]333J
LH L 10[]393J
LH L 10[]473J
LH L 10[]563J
LH L 10[]683J
LH L 10[]823J
LH L 10[]104J
LH L 10[]124J
LH L 10[]154J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
3.3
3.9
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±5%
50
50
50
50
50
50
90
90
90
90
60
60
60
60
50
50
40
40
40
40
40
40
40
30
30
30
30
30
30
30
50
50
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
40
40
40
40
30
30
30
30
30
30
46
40
0.019
0.022
0.024
0.025
0.028
0.031
0.034
0.038
0.042
0.046
0.061
0.069
0.078
0.085
0.093
0.10
0.12
0.13
0.18
0.25
0.29
0.40
0.44
0.50
0.56
0.62
0.84
0.93
1.0
4.2
4.1
7.96
7.96
4.7
38
4.0
7.96
5.6
34
3.8
7.96
6.8
30
3.4
7.96
8.2
24
3.3
7.96
10
19
3.2
2.52
12
16
2.8
2.52
15
12
2.6
2.52
18
9.2
2.4
2.52
22
8.6
2.1
2.52
27
7.1
2.0
2.52
33
6.8
1.9
2.52
39
6.7
1.8
2.52
47
6.2
1.7
2.52
56
5.2
1.6
2.52
68
4.9
1.5
2.52
82
4.7
1.4
2.52
100
3.8
1.2
0.796
120
3.2
1.0
0.796
150
2.9
0.95
0.80
0.75
0.70
0.68
0.63
0.57
0.52
0.48
0.42
0.41
0.33
0.30
0.29
0.25
0.24
0.21
0.20
0.19
0.17
0.16
0.15
0.12
0.11
0.090
0.081
0.075
0.060
0.056
0.053
0.050
0.036
0.035
0.033
0.031
0.030
0.028
0.796
180
2.6
0.796
/
220
2.3
0.796
270
2.1
0.796
330
2.0
0.796
390
1.8
0.796
0.796
470
1.7
560
1.5
0.796
680
1.4
0.796
820
1.3
1.4
0.796
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
39000
47000
56000
68000
82000
100000
120000
150000
1.2
1.8
0.252
±5%
0.87
0.83
0.75
0.70
0.67
0.56
0.54
0.49
0.41
0.38
0.36
0.29
0.27
0.24
0.21
0.20
0.15
0.14
0.13
0.12
0.10
0.095
0.088
0.085
0.070
0.069
2.3
0.252
±5%
2.7
0.252
±5%
3.0
0.252
±5%
3.9
0.252
±5%
4.3
0.252
±5%
5.8
0.252
±5%
6.4
0.252
±5%
7.1
0.252
±5%
9.0
0.252
±5%
10
0.252
±5%
12
0.252
±5%
19
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0252MHz
L:1kHz,ꢀQ:0.0252MHz
L:1kHz,ꢀQ:0.0252MHz
±5%
21
±5%
34
±5%
38
±5%
43
±5%
67
±5%
76
±5%
84
±5%
96
±5%
170
200
210
240
260
300
±5%
±5%
±5%
±5%
±5%
●LHL13
Self-resonant
frequency
[MHz](min..)
Nominal inductance
[μH]
Inductance
tolerance
Q
(min.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Measuring frequency
[MHz]
Parts number
EHS
LH L 13[]100K
LH L 13[]150K
LH L 13[]220K
LH L 13[]330K
LH L 13[]470K
LH L 13[]680K
LH L 13[]101K
LH L 13[]151K
LH L 13[]221K
LH L 13[]331K
LH L 13[]471K
LH L 13[]681K
LH L 13[]102J
LH L 13[]152J
LH L 13[]222J
LH L 13[]332J
LH L 13[]472J
LH L 13[]682J
LH L 13[]103J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
15
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±5%
140
140
100
100
70
19
12
0.023
0.028
0.035
0.043
0.052
0.070
0.12
0.19
0.23
0.35
0.43
0.61
1.2
4.5
4.0
2.52
2.52
22
7.6
3.4
2.52
33
6.9
3.2
2.52
47
5.6
2.8
2.52
68
50
4.4
2.4
2.52
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
50
3.3
2.0
0.796
50
2.6
1.5
0.796
40
2.2
1.3
0.796
30
1.8
1.1
0.796
30
1.5
0.90
0.80
0.60
0.45
0.40
0.33
0.28
0.25
0.19
0.796
30
1.2
0.796
30
1.0
0.252
±5%
40
0.83
0.70
0.60
0.43
0.38
0.30
1.8
0.252
±5%
40
2.2
0.252
±5%
40
3.4
0.252
0.252
±5%
40
4.7
±5%
30
5.6
0.252
±5%
70
10
L:1kHz,ꢀQ:0.0796MHz
・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
88
■PARTS NUMBER
●LHLP10
Inductance
Measuring
frequency [MHz]
Nominal inductance
[μH]
Inductance
tolerance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Parts number
EHS
LH LP10[]100M
LH LP10[]150M
LH LP10[]220M
LH LP10[]330M
LH LP10[]470M
LH LP10[]680M
LH LP10[]101K
LH LP10[]151K
LH LP10[]221K
LH LP10[]331K
LH LP10[]471K
LH LP10[]681K
LH LP10[]102K
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
15
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
0.038
0.049
0.075
0.094
0.15
0.23
0.30
0.47
0.70
0.88
1.3
2.5
2.2
2.52
2.52
22
1.9
2.52
33
1.7
2.52
47
1.3
2.52
68
1.0
2.52
100
150
220
330
470
680
1000
0.90
0.78
0.63
0.58
0.46
0.38
0.30
0.796
0.796
0.796
0.796
0.796
0.796
0.252
1.9
3.2
●LHLP12NB
Parts number
Inductance
Measuring
frequency [MHz]
Nominal inductance
[μH]
Inductance
tolerance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
EHS
LH LP12NB150M
LH LP12NB220M
LH LP12NB330M
LH LP12NB470M
LH LP12NB680M
LH LP12NB101K
LH LP12NB151K
LH LP12NB221K
LH LP12NB331K
LH LP12NB471K
LH LP12NB681K
LH LP12NB102K
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
15
22
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
0.035
0.050
0.070
0.081
0.12
0.16
0.24
0.38
0.46
0.69
1.1
3.3
2.7
2.52
2.52
33
2.4
2.52
47
2.1
2.52
/
68
1.7
2.52
100
150
220
330
470
680
1000
1.6
0.796
0.796
0.796
0.796
0.796
0.796
0.252
1.3
0.95
0.89
0.74
0.58
0.46
1.8
●LHLP16NB
Parts number
Inductance
Measuring
frequency [MHz]
Nominal inductance
[μH]
Inductance
tolerance
DC Resistance
[Ω](max.)
Rated current
[A](max.)
EHS
LH LP16NB100M
LH LP16NB150M
LH LP16NB220M
LH LP16NB330M
LH LP16NB470K
LH LP16NB680K
LH LP16NB101K
LH LP16NB151K
LH LP16NB221K
LH LP16NB331K
LH LP16NB471K
LH LP16NB681K
LH LP16NB102K
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
10
15
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
0.019
0.025
0.027
0.035
0.045
0.062
0.091
0.14
5.2
5.1
4.6
4.0
3.4
3.1
2.3
1.9
1.5
1.3
1.0
0.98
0.74
1
1
1
1
1
1
1
1
1
1
1
1
1
22
33
47
68
100
150
220
330
470
680
1000
0.20
0.31
0.47
0.58
0.94
・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
89
■PARTS NUMBER
●LHLC08
Self-resonant
frequency
[MHz](min..)
Nominal inductance
[μH]
Inductance
tolerance
Q
(min.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Measuring frequency
[MHz]
Parts number
EHS
LH LC08[]1R0N
LH LC08[]1R5M
LH LC08[]2R2M
LH LC08[]2R7M
LH LC08[]3R3M
LH LC08[]3R9M
LH LC08[]4R7M
LH LC08[]5R6M
LH LC08[]6R8M
LH LC08[]8R2M
LH LC08[]100K
LH LC08[]120K
LH LC08[]150K
LH LC08[]180K
LH LC08[]220K
LH LC08[]270K
LH LC08[]330K
LH LC08[]390K
LH LC08[]470K
LH LC08[]560K
LH LC08[]680K
LH LC08[]820K
LH LC08[]101K
LH LC08[]121K
LH LC08[]151K
LH LC08[]181K
LH LC08[]221K
LH LC08[]271K
LH LC08[]331K
LH LC08[]391K
LH LC08[]471K
LH LC08[]561K
LH LC08[]681K
LH LC08[]821K
LH LC08[]102J
LH LC08[]122J
LH LC08[]152J
LH LC08[]182J
LH LC08[]222J
LH LC08[]272J
LH LC08[]332J
LH LC08[]392J
LH LC08[]472J
LH LC08[]562J
LH LC08[]682J
LH LC08[]822J
LH LC08[]103J
LH LC08[]123J
LH LC08[]153J
LH LC08[]183J
LH LC08[]223J
LH LC08[]273J
LH LC08[]333J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±5%
40
40
40
40
40
40
40
40
40
40
65
65
50
50
50
50
40
40
40
40
35
35
25
25
20
35
35
25
25
20
25
25
25
30
55
45
55
55
55
55
55
55
65
65
65
65
60
60
60
60
60
60
60
76
65
0.013
0.014
0.017
0.019
0.021
0.024
0.025
0.028
0.030
0.034
0.041
0.044
0.053
0.060
0.068
0.091
0.10
0.12
0.15
0.17
0.20
0.22
0.32
0.36
0.41
0.66
0.73
0.85
0.97
1.1
5.4
5.2
7.96
7.96
2.2
56
4.8
7.96
2.7
48
4.2
7.96
3.3
41
3.8
7.96
3.9
33
3.7
7.96
4.7
30
3.6
7.96
5.6
23
3.5
7.96
6.8
21
3.4
7.96
8.2
19
3.0
7.96
10
17
2.9
2.52
12
16
2.8
2.52
15
13
2.6
2.52
18
12
2.4
2.52
22
11
2.3
2.52
27
10
2.0
2.52
33
8.8
8.4
8.2
7.9
7.0
6.5
5.7
5.2
4.7
4.2
3.7
3.5
3.2
2.9
2.4
2.2
2.0
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.85
0.78
0.68
0.62
0.61
0.60
0.48
0.44
0.35
0.30
0.28
0.25
0.23
1.9
2.52
39
1.7
2.52
47
1.5
2.52
56
1.4
2.52
68
1.3
2.52
82
1.2
2.52
/
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
1.0
0.796
0.96
0.88
0.71
0.66
0.63
0.59
0.55
0.49
0.47
0.44
0.38
0.35
0.31
0.29
0.26
0.23
0.21
0.19
0.18
0.16
0.15
0.14
0.13
0.11
0.084
0.068
0.066
0.057
0.054
0.053
0.796
0.796
0.796
0.796
0.796
0.796
0.796
1.3
0.796
1.5
0.796
1.8
0.796
2.3
0.796
2.7
0.252
±5%
3.2
0.252
±5%
4.1
0.252
±5%
4.8
0.252
±5%
5.6
0.252
0.252
±5%
7.5
±5%
8.5
0.252
±5%
9.7
0.252
±5%
14
0.252
±5%
16
0.252
±5%
18
0.252
±5%
20
0.252
±5%
32
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
±5%
36
±5%
62
±5%
72
±5%
82
±5%
90
±5%
100
・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
90
■PARTS NUMBER
●LHLC10
Self-resonant
frequency
[MHz](min..)
Nominal inductance
[μH]
Inductance
tolerance
Q
(min.)
DC Resistance
[Ω](max.)
Rated current
[A](max.)
Measuring frequency
[MHz]
Parts number
EHS
LH LC10[]3R3M
LH LC10[]3R9M
LH LC10[]4R7M
LH LC10[]5R6M
LH LC10[]6R8M
LH LC10[]8R2M
LH LC10[]100K
LH LC10[]120K
LH LC10[]150K
LH LC10[]180K
LH LC10[]220K
LH LC10[]270K
LH LC10[]330K
LH LC10[]390K
LH LC10[]470K
LH LC10[]560K
LH LC10[]680K
LH LC10[]820K
LH LC10[]101K
LH LC10[]121K
LH LC10[]151K
LH LC10[]181K
LH LC10[]221K
LH LC10[]271K
LH LC10[]331K
LH LC10[]391K
LH LC10[]471K
LH LC10[]561K
LH LC10[]681K
LH LC10[]821K
LH LC10[]102J
LH LC10[]122J
LH LC10[]152J
LH LC10[]182J
LH LC10[]222J
LH LC10[]272J
LH LC10[]332J
LH LC10[]392J
LH LC10[]472J
LH LC10[]562J
LH LC10[]682J
LH LC10[]822J
LH LC10[]103J
LH LC10[]123J
LH LC10[]153J
LH LC10[]183J
LH LC10[]223J
LH LC10[]273J
LH LC10[]333J
LH LC10[]393J
LH LC10[]473J
LH LC10[]563J
LH LC10[]683J
LH LC10[]823J
LH LC10[]104J
LH LC10[]124J
LH LC10[]154J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
3.3
3.9
±20%
±20%
±20%
±20%
±20%
±20%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±5%
50
50
50
50
50
50
90
90
90
90
60
60
60
60
50
50
40
40
40
40
40
40
40
30
30
30
30
30
30
30
50
50
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
40
40
40
40
30
30
30
30
30
30
46
40
0.019
0.022
0.024
0.025
0.028
0.031
0.034
0.038
0.042
0.046
0.061
0.069
0.078
0.085
0.093
0.10
0.12
0.13
0.18
0.25
0.29
0.40
0.44
0.50
0.56
0.62
0.84
0.93
1.0
5.0
4.8
7.96
7.96
4.7
38
4.7
7.96
5.6
34
4.5
7.96
6.8
30
4.1
7.96
8.2
24
3.9
7.96
10
19
3.6
2.52
12
16
3.4
2.52
15
12
3.2
2.52
18
9.2
3.0
2.52
22
8.6
2.8
2.52
27
7.1
2.7
2.52
33
6.8
2.6
2.52
39
6.7
2.4
2.52
47
6.2
2.3
2.52
56
5.2
2.1
2.52
68
4.6
2.0
2.52
82
4.7
1.8
2.52
100
3.8
1.5
0.796
120
3.2
1.3
0.796
150
2.9
1.2
0.796
180
2.6
1.0
0.796
/
220
2.3
0.97
0.90
0.86
0.75
0.65
0.61
0.57
0.50
0.48
0.40
0.37
0.36
0.32
0.30
0.26
0.25
0.24
0.21
0.20
0.18
0.14
0.13
0.11
0.10
0.095
0.076
0.068
0.065
0.061
0.045
0.043
0.041
0.038
0.037
0.035
0.796
270
2.1
0.796
330
2.0
0.796
390
1.8
0.796
0.796
470
1.7
560
1.5
0.796
680
1.4
0.796
820
1.3
1.4
0.796
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
39000
47000
56000
68000
82000
100000
120000
150000
1.2
1.8
0.252
±5%
0.87
0.83
0.75
0.70
0.67
0.56
0.54
0.49
0.41
0.38
0.36
0.29
0.27
0.24
0.21
0.20
0.15
0.14
0.13
0.12
0.10
0.095
0.088
0.085
0.070
0.069
2.3
0.252
±5%
2.7
0.252
±5%
3.0
0.252
±5%
3.9
0.252
±5%
4.3
0.252
±5%
5.8
0.252
±5%
6.4
0.252
±5%
7.1
0.252
±5%
9.0
0.252
±5%
10
0.252
±5%
12
0.252
±5%
19
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0796MHz
L:1kHz,ꢀQ:0.0252MHz
L:1kHz,ꢀQ:0.0252MHz
L:1kHz,ꢀQ:0.0252MHz
±5%
21
±5%
34
±5%
38
±5%
43
±5%
67
±5%
76
±5%
84
±5%
96
±5%
170
200
210
240
260
300
±5%
±5%
±5%
±5%
±5%
・ [] Please specify the packaging code. (TB: Taping, NB: Bulk)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
91
RADIAL LEADED INDUCTORS
■PACKAGING
①Minimum Quantity
Standard quantity [pcs]
Type (EIA)
LHL 08
Box
-
Bulk
100
50
Taped
1000
500
500
200
-
LHL 10
-
LHL 13
-
25
LHLP10
LHLP12NB
LHLP16NB
LHLC08
LHLC10
500
300
200
-
-
-
-
-
100
50
1000
500
-
②Bulk dimensions
●LHL08~13
Dimensions
F*
Type
LHL08
φD(max)
9.0
H2(max)
9.5
ℓ
φd
5.0±1.0
5.0±1.0
0.6±0.05
(0.354)
11.0
(0.374)
14.0
(0.197±0.039)
5.0±1.0
(0.197±0.039)
5.0±1.0
(0.024±0.002)
0.6±0.05
LHL10
(0.433)
14.0
(0.551)
17.0
(0.197±0.039)
7.5±1.0
(0.197±0.039)
5.0±1.0
(0.024±0.002)
0.8±0.05
LHL13
(0.551)
(0.669)
(0.295±0.039)
(0.197±0.039)
(0.031±0.002)
Unit:mm(inch)
*Measured at the base of the leads.
●LHLP10~16
Dimensions
F*
Type
φD(max)
H2(max)
11.0
ℓ
φd
11.0
(0.433)
13.0
5.0±1.0
5.0±1.0
0.6±0.05
LHLP10
LHLP12
LHLP16
(0.433)
16.0
(0.197±0.039)
5.0±1.0
(0.197±0.039)
5.0±1.0
(0.024±0.004)
0.6±0.05
(0.512)
17.0
(0.669)
(0.624)
19.0
(0.741)
(0.197±0.039)
7.5±1.0
(0.295±0.039)
(0.197±0.039)
5.0±1.0
(0.197±0.039)
(0.024±0.004)
0.8±0.05
(0.031±0.004)
Unit:mm(inch)
*Measured at the base of the leads.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_LH_pack_e-E03R02
●LHL08~13
LHL08
φ9.0 max
LHL10
φ11.0 max
LHL13
φ14.0 max
D
H1
H
(φ0.354 max)
30.5 max
(φ0.433 max)
34.0 max
(φ0.551 max)
37.0 max
(1.20 max)
(1.34 max)
(1.46 max)
18.0+2.0/-0.0
(0.709+0.079/-0.000)
9.5 max
18.0+2.0/-0.0
(0.709+0.079/-0.000)
14.0 max
18.0+2.0/-0.0
(0.709+0.079/-0.000)
17.0 max
H2
P
(0.374 max)
12.7±1.0
(0.551 max)
12.7±1.0
(0.669 max)
15.0±1.0
(0.500±0.039)
12.7±0.3※1
(0.500±0.039)
12.7±0.3※1
(0.591±0.039)
15.0±0.3※1
P0
P1
P2
F
(0.500±0.012)
3.85±0.7
(0.500±0.012)
3.85±0.7
(0.591±0.012)
3.75±0.7
(0.152±0.028)
6.35±1.3
(0.152±0.028)
6.35±1.3
(0.148±0.028)
7.50±1.3
(0.250±0.051)
5.0+0.8/-0.2
(0.197+0.031/-0.008)
0.0±2.0
(0.250±0.051)
5.0+0.8/-0.2
(0.197+0.031/-0.008)
0.0±2.0
(0.295±0.051)
7.50+0.8/-0.2
(0.295+0.031/-0.008)
0.0±2.0
h
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5 min
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5 min
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5 min
W
W0
W1
W2
D0
φd
t
(0.492 min)
(0.492 min)
(0.492 min)
9.0±0.5
9.0±0.5
9.0±0.5
(0.354±0.020)
3.0 max※2
(0.354±0.020)
3.0 max※2
(0.354±0.020)
3.0 max※2
(0.118 max)
φ4.0±0.2
(0.118 max)
φ4.0±0.2
(0.118 max)
φ4.0±0.2
(φ0.158±0.008)
φ0.6±0.05
(φ0.158±0.008)
φ0.6±0.05
(φ0.158±0.008)
φ0.8±0.05
(φ0.024±0.002)
0.6±0.3
(φ0.024±0.002)
0.6±0.3
(φ0.031±0.002)
0.6±0.3
(0.024±0.012)
(0.024±0.012)
(0.024±0.012)
※1 Accumulated error for 20 pitches is 1mm.
※2 Bonding tape must not protrude from the base tape.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_LH_pack_e-E03R02
●LHLP10TB
Type
Symbol
D
Dimensions
φ11.0 max
Symbol
h
Dimensions
0.0±2.0
(φ0.433 max)
32.0 max
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5 min
H1
H
W
W0
W1
W2
D0
φd
t
(1.26 max)
18.0+2.0/-0.0
(0.709+0.079/-0.000)
11.0 max
(0.492 min)
9.0±0.5
H2
P
(0.433 max)
(0.354±0.020)
3.0 max※2
12.7±1.0
LHLP10
(0.500±0.039)
12.7±0.3※1
(0.118 max)
φ4.0±0.2
P0
P1
P2
F
(0.500±0.012)
3.85±0.7
(φ0.158±0.008)
φ0.6±0.05
(0.152±0.028)
6.35±1.3
(φ0.024±0.002)
0.6±0.3
(0.250±0.051)
5.0+0.8/-0.2
(0.197+0.031/-0.008)
(0.024±0.012)
Unit: mm(inch)
※1 Accumulated error for 20 pitches is 1mm.
※2 Bonding tape must not protrude from the base tape.
●LHLC08, LHLC10
Dimensions
F*
Type
φD(max)
H2(max)
9.5
ℓ
φd
9.0
5.0±1.0
5.0±1.0
0.6±0.05
LHLC08
(0.354)
(0.374)
14.0
(0.197±0.039)
5.0±1.0
(0.197±0.039)
5.0±1.0
(0.024±0.002)
0.6±0.05
11.0
LHLC10
(0.433)
(0.551)
(0.197±0.039)
(0.197±0.039)
(0.024±0.002)
Unit:mm(inch)
*Measured at the base of the leads.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_LH_pack_e-E02R01
LHLC08
φ9.0max
LHLC10
φ11.0max
D
H1
H
(φ0.354max)
30.5max
(φ0433max)
34.0max
(1.20max)
(1.34max)
18.0+2.0/-0.0
(0.709+0.079/-0.000)
9.5max
18.0+2.0/-0.0
(0.709+0.079/-0.000)
14.0max
H2
P
(0.374max)
(0.551max)
12.7±1.0
12.7±1.0
(0.500±0.039)
12.7±0.3※1
(0.500±0.039)
12.7±0.3※1
P0
P1
P2
F
(0.500±0.012)
3.85±0.7
(0.500±0.012)
3.85±0.7
(0.152±0.028)
6.35±1.3
(0.152±0.028)
6.35±1.3
(0.250±0.051)
5.0+0.8/-0.2
(0.197+0.031/-0.008)
0.0±2.0
(0.250±0.051)
5.0+0.8/-0.2
(0.197+0.031/-0.008)
0.0±2.0
H
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5min
(0.0±0.079)
18.0+1.0/-0.5
(0.709+0.039/-0.020)
12.5min
W
W0
W1
W2
D0
φd
t
(0.492min)
(0.492min)
9.0±0.5
9.0±0.5
(0.354±0.020)
3.0max※2
(0.354±0.020)
3.0max※2
(0.118max)
(0.118max)
φ4.0±0.2
φ4.0±0.2
(φ0.158±0.008)
φ0.6±0.05
(φ0.158±0.008)
φ0.6±0.05
(φ0.024±0.002)
0.6±0.3
(φ0.024±0.002)
0.6±0.3
(0.024±0.012)
(0.024±0.012)
Unit:mm(inch)
※1 Accumulated error for 20 pitches is 1mm.
※2 Bonding tape must not protrude from the base tape.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_LH_pack_e-E02R01
AXIAL LEADED INDUCTORS(CAL Type)、
RADIAL LEADED INDUCTORS(LH Type)、
LEADED FERRITE BEAD INDUCTORS( FB Series A Type/R Type)
■RELIABILITY DATA
1. Operating temperature Range
CAL45 Type
-25~+ 105℃
Specified Value
LHL□□□
FBA/FBR
-25~+ 85℃
Test Methods and CAL45 Type
Remarks LHL□□□
: Including self-generated heat
: Including self-generated heat
2. Storage temperature Range
CAL45 Type
LHL□□□
Specified Value
-40~+ 85℃
FBA/FBR
3. Rated current
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
CAL45 Type :
The maximum DC value having inductance within 10% and temperature increase within 40℃ by the application of DC bias.
LHL□□□ :
The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10:within 30%) and temperature increase within the
following specified temperature by the application of DC bias.
Test Methods and
Remarks
Reference temperature
: 25℃(LHL08, LHL10, LHL13)
: 30℃(LHLP□□)
: 40℃(LHLC08, LHLC10)
FBA/FBR :
No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be
within ±20% of the initial value.
This is not guaranteed for electrical characteristics during current application.
4. Impedance
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
Within the specified tolerance
FBA/FBR :
Test Methods and
Remarks
Measuring equipment
Measuring frequency
: Impedance analyzer (HP4191A) or its equivalent
: Specified frequency
5. Inductance
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
Specified Value
CAL45 Type :
Measuring equipment
Measuring frequency
LHL□□□ :
: LCR meter (HP4285A + HP42851A or its equivalent)
: Specified frequency
Test Methods and
Remarks
Measuring equipment
: LCR meter (HP4285A+HP42851A or its equivalent)
: LCR meter (HP4263A) or its equivalent (at 1kHz)
: Specified frequency
Measuring frequency
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E03R02
6. Q
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
Within the specified tolerance
LHL□□□ (except LHLP) :
Measuring equipment
Test Methods and
Remarks
: LCR meter (HP4285A+HP42851A or its equivalent)
: LCR meter (HP4263A) or its equivalent (at 1kHz)
: Specified frequency
Measuring frequency
7. DC Resistance
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
Test Methods and
Remarks
Measuring equipment
: DC ohmmeter
8. Self resonance frequency
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
Within the specified tolerance
Test Methods and LHL□□□(except LHLP) :
Remarks Measuring equipment
: (HP4191A, 4192A) its equivalent
9. Temperature characteristic
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
△L/L : Within ±7% (except LHLP16 : Within ±20%)
Change of maximum inductance deviation in step 1 to 5
Temperature (℃)
Step
LHL□□□
1
2
3
4
5
20
Test Methods and
Remarks
Minimum operating temperature
20 (Standard temperature)
Maximum operating temperature
20
10. Tensile strength test
CAL45 Type
LHL□□□
FBA/FBR
Specified Value
No abnormality such as cut lead, or looseness.
CAL45 Type : Apply the stated tensile force progressively in the direction to draw terminal.
force (N)
10
duration (s)
10
LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.
Test Methods and
Remarks
Nominal wire diameter tensile φd (mm)
0.3<φd≦0.5
force (N)
duration (s)
5
0.5<φd≦0.8
10
25
30±5
0.8<φd≦1.2
FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the
of the component during 10±1 seconds.
axial direction
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
11. Over current
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
No emission of smoke no firing.
There shall be no scorch or short of wire.
LHLC08, LHLC10 : There shall be no firing.
LHL□□□・CAL45 Type :
Measuring current
Duration
Test Methods and
Remarks
: Rated current×2
: 5 min.
: one time
Number of measuring
12. Terminal strength : bending
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
No abnormality such as cut lead, or looseness.
CAL45 Type :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Mass reference
weight
Bending force
0.3< φ d≦0.5
0.5< φ d≦0.8
2.5
5
0.25
0.50
Test Methods and
Remarks
LHL□□□・FBA/FBR :
Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the
initial position. This operation is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter
tensile
Mass reference
Bending force
weight
0.25
0.5
0.3<φd≦0.5
0.5<φd≦0.8
0.8<φd≦1.2
2.5
5
10
1.0
13. Insulation resistance : between the terminals and body
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
100MΩ min.
LHL□□□ :
Applied voltage
Duration
Test Methods and
Remarks
: 500 VDC
: 60 sec.
14. Insulation resistance : between terminals and core
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
1MΩ min.
FBA/FBR :
Applied voltage
Duration
Test Methods and
Remarks
: 100 VDC
: 60±5 sec.
15. Withstanding : between the terminals and body
CAL45 Type
Specified Value
LHL□□□
FBA/FBR
No abnormality such as insulation damage
LHL□□□ :
According to JIS C5102. 7. 1. 3 (C)
Metal global method
Test Methods and
Remarks
Applied voltage
Duration
: 500 VDC
: 60 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
16. DC bias characteristic
CAL45 Type
△L/L : Within -10%
Specified Value
LHL□□□
FBA/FBR
Test Methods and
Remarks
CAL45 Type : Measure inductance with application of rated current using LCR meter to compare it with the initial value.
17. Body strength
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
No abnormality as damage.
No abnormality such as cracks on body.
CAL45 Type :
Applied force
Duration
:50N
: 10 sec.
Speed
: Shall attain to specified force in 2 sec.
FBA :
Applied force : 50±3N
Duration : 30±1 sec.
Test Methods and
Remarks
18. Resistance to vibration
CAL45 Type
△L/L : Within ±5%
Appearance : No abnormality
△L/L : Within ±5%
LHL□□□
FBA/FBR
Specified Value
Q change : Within ±30% (LHLP : only △L/L)
Appearance : No abnormality
Impedance change : Within ±20%
CAL45 Type :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range
Amplitude
: 10 to 55 to 10Hz (1min.)
: 1.5mm
Mounting method
Recovery
: Soldering onto printed board.
Test Methods and
Remarks
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.
LHL□□□・FBA/FBR :
Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
: 10 to 55 to 10Hz (1min.)
: 1.5mm
Frequency range
Amplitude
Mounting method
: Soldering onto printed board.
19. Resistance to shock
CAL45 Type
No significant abnormality in appearance
Specified Value
LHL□□□
FBA/FBR
CAL45 Type :
Drop test
Test Methods and
Remarks
Impact material
Height
: concrete or vinyl tile
: 1m
Total number of drops
: 10 times
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
20. Solderability
Specified Value
CAL45 Type
LHL□□□
FBA/FBR
At least 75% of terminal electrode is covered by new solder.
At least 75% of terminal electrode is covered by new solder.
At least 90% of terminal electrode is covered by new solder.
CAL45 Type :
Solder temperature
Duration
: 230±5℃
: 2±0.5 sec.
LHL□□□ :
Solder temperature
Duration
: 235±5℃
Test Methods and
Remarks
: 2±0.5 sec.
Immersion depth
FBA/FBR :
: Up to 1.5mm from bottom of case.
Solder temperature
Duration
: 230±5℃
: 3±1 sec.
Immersion depth
: Up to 1.5mm from terminal root.
21. Resistance to soldering heat
CAL45 Type
△L/L : Within ±5%
No significant abnormality in appearance
Inductance change : Within ±5%
LHL□□□
Specified Value
Q change : Within ±30%(LHLP : only △L/L)
No significant abnormality in appearance
Impedance change : Within ±20%
FBA/FBR
CAL45 Type :
Solder temperature
: 270±5℃
Duration
: 5±0.5 sec. One time
Immersed conditions
Recovery
: Inserted into substrate with t=1.6mm
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within
2hrs.
LHL□□□ :
Solder bath method :
Solder temperature
Duration
: 260±5℃
: 10±1 sec.
: Up to 1.5mm from the bottom of case.
: 350±10℃ (At the tip of soldering iron)
: 5±1 sec.
Manual soldering :
Solder temperature
Duration
Test Methods and
Remarks
: Up to 1.5mm from the bottom of case.
: No excessive pressing shall be applied to terminals.
: 4 to 24hrs of recovery under the standard condition after the test.
Caution
Recovery
FBA/FBR :
Solder bath method:
Condition 1:
Solder temperature
Duration
: 260±5℃
: 10±1 sec.
Immersion depth
Solder temperature
Duration
: Up to 1.5mm from the terminal root.
: 350±5℃
: 3±1 sec.
Condition 2 :
Immersion depth
Recovery
: Up to 1.5mm from the terminal root.
: 3hrs of recovery under the standard condition after the test.
22. Resistance to solvent
CAL45 Type
Please avoid the ultrasonic cleaning of this product.
LHL□□□
FBA/FBR
Specified Value
No significant abnormality in appearance
Impedance change : Within ±20%
FBA/FBR :
Solvent temperature
Duration
: 20~25℃
: 30±5 sec.
: Acetone
Test Methods and
Remarks
Solvent type
Recovery
: 3hrs of recovery under the standard condition after the test.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
23. Thermal shock
Specified Value
CAL45 Type
LHL□□□
△L/L : Within ±10%
Appearance : No abnormality
Inductance change : Within ±10%
Q change : Within ±30% (LHLP:only △L/L)
Appearance : No abnormality
FBA/FBR
Impedance change : Within ±20%
CAL45 Type:Conditions for 1cycle
Step
Temperature (℃)
-25+0/-3
Duration (min.)
30±3
1
2
3
4
Room temperature
+85+2/-0
Within 3
30±3
Room temperature
Within 3
Number of cycles
Recovery
: 5 cycles
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the
measurement within 2hrs.
Test Methods and
Remarks
LHL□□□・FBA/FBR: According to JIS C0025
Conditions for 1 cycle
Step
Temperature (℃)
Minimum operating temperature+0/-3
Room temperature
Duration (min.)
30±3
1
2
3
4
Within 3
30±3
Minimum operating temperature+2/-0
Room temperature
Within 3
Number of cycles
Recovery
: 10 cycles 〔LHL□□□〕
: 5 cycles (FBA/ FBR)
: 4 to 24hrs of recovery under the standard condition after the removal from the test chamber. 〔LHL□□□〕
: 3hrs of recovery under the standard condition after the removal from the test chamber. (FBA/ FBR)
24. Damp heat
Specified Value
CAL45 Type
LHL□□□
△L/L : Within ±10%
Appearance:No abnormality
FBA/FBR
Impedance change:Within ±20%
CAL45 Type :
Temperature
Humidity
: 40±2℃
: 90~95%RH
Duration
: 1000 hrs
Test Methods and
Remarks
Recovery
FBA/FBR :
Temperature
Humidity
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
: 60±2℃
: 90~95%RH
: 1000 hrs
Duration
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
25. Loading under damp heat
CAL45 Type
△L/L : Within ±10%
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
CAL45 Type :
Temperature
Humidity
: 40±2℃
: 90~95%RH
: 1000 hrs
Duration
Applied current
Recovery
: Rated current
Test Methods and
Remarks
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
LHL□□□ :
Temperature
Humidity
: 40±2℃
: 90~95%RH
Duration
: 1000+48/-0 hrs
Applied current
Recovery
: Rated current
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
26. Loading at high temperature
CAL45 Type
△L/L : Within ±10%
Specified Value
LHL□□□
FBA/FBR
CAL45 Type :
Temperature
Duration
: 85±2℃
Test Methods and
Remarks
: 1000 hrs
Applied current
Recovery
: Rated current
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
27. Low temperature life test
CAL45 Type
△L/L : Within ±10%
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
CAL45 Type :
Temperature
Duration
: -25±2℃
: 1000 hrs
Test Methods and
Remarks
Recovery
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
LHL□□□ :
Temperature
Duration
:-40±3℃
: 1000+48/-0 hrs
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
28. High temperature life test
CAL45 Type
Appearance : No abnormality
Specified Value
LHL□□□
Inductance change : Within ±10%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
LHL□□□ :
Temperature
Duration
Test Methods and
Remarks
: 105±2℃
: 1000+48/-0 hrs
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_reli_e-E02R01
AXIAL LEADED INDUCTORS(CAL Type)、
RADIAL LEADED INDUCTORS(LH Type)、
LEADED FERRITE BEAD INDUCTORS(FB Series A Type/R Type)
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
Precautions
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
◆Design
Precautions
1. Please design insertion pitches as matching to that of leads of the component on PCBs.
◆Design
Technical
1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will
considerations
cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the flux during the soldering operation.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, soldering etc sufficiently.
Precautions
◆Recommended conditions for using a soldering iron:
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. As for reflow soldering, please contact our sales staff.
◆Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
Technical
considerations
◆Recommended conditions for using a soldering iron
If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade
the reliability of the products.
5. Cleaning
Precautions
◆Cleaning conditions
1. CAL type, LH type
Please do not do cleaning by a supersonic wave.
◆Cleaning conditions
Technical
considerations
1. CAL type, LH type,
If washing by supersonic waves, supersonic waves may deform products.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_prec_e-E02R01
6. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
2. LH type
Precautions
If inductors are dropped onto the floor or a hard surface they should not be used.
◆Packing
1. Please do not give the inductors any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading /
fragile item).
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Mechanical considerations
Technical
1. There is a case to be damaged by a mechanical shock.
2. LH type
considerations
There is a case to be broken by a fall.
◆Packing
1. There is a case that a lead wire could be deformed by a fall or an excessive shock.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
Recommended conditions
・Ambient temperature 0~40℃
Precautions
・Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_leaded_prec_e-E02R01
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明